This example shows the simulation of an attitude-rate control system for an aircraft using a

QFIRE CTR-101

as controller.

This example shows the simulation of an oscillator based on the Lotka-Volterra equations using

QFIRE Studio

.

This example shows the simulation of a parallel compensated servo system using

QFIRE Studio

.

This example shows the simulation of a PID Controller used to stabilize a second order plant using

QFIRE Studio

.

This example shows the simulation of a servomechanism for antenna azimuth control using

QFIRE Studio

.

This example shows the simulation of a Van der Pol oscillation using

QFIRE Studio

.

This example shows a bouncing ball simulation using only integrator blocks in a

QFIRE CTR-101

.

This example shows the simulation of a non-linear control system from [1] with feedback linearization control technique using

QFIRE Studio

.

This example shows the modeling and simulation of a non-linear control system from [1] using

QFIRE Studio

 to implement a linear backstepping control law.

This example shows a bouncing ball simulation using Hierarchical State Machines in a

QFIRE CTR-101

.