Goto and From
Acts as a virtual connection
Category: Routing
Description:
In complex diagrams, some connections can cause a bad organization. In these cases, it is recommended to use Goto and From blocks. Theses blocks work together as a virtual connection. Figure 1 shows an exemple of these blocks being used.
Figure 1 - Signal sent to a Goto and recovered by a From block
The diagram from Figure 1 had its Goto and From block configurated. This configuration was performed by the Goto Properties and From Properties.
Figure 2 - Goto dialog
Figure 2 shows the Goto Properties tab. Setting the "Goto Name" parameter as a string. This name will be selectable by the From Properties as shown in Figure 3.
Figure 3 - From dialog
Parameters:
The connection between Goto and From blocks work when they use the same Goto Name. A Goto block can send a signal to many From blocks when they have the same Goto Name specified.
The Goto Name is typed in the Goto Properties and, after this, selected in the From Properties.
Ports:
Input
The signal flowing into this port is sent to a From block with the specified Goto Name.
Data Types:
Output
The signal coming from a Goto block is received by the From block and returned by its output port.
Data Types:
About MWF
MWF is a traditional Brazilian company that provides a wide range of electronic and mechatronic products for industry sectors such as automotive, agricultural machinery and aerospace.
Contact Us
Rua Doutor Siqueira, 139 / Sala 804 Campos dos Goytacazes - RJ, Brasil
contact@mwf-technologies.com
© 2018-2026 MWF. All rights reserved.