Switch
Routes two input signals through a single output according to a trigger
Category: Routing
Description:
The Switch block allows the user to change the signal flowing into a port by a trigger. Figure 1 shows a diagram using Switch block with a Compare To Constant block signal as a trigger.
Figure 1 - Switch usage example
Figure 2 - Signal generated from example in Figure 1
As can be seen, at 5s, the signal switches from a ramp to a constant due to the trigger generated by the Compare To Constant block.
Ports:
Input
Input signal used as Output signal when Trigger Input is different from zero.
Data Types:
Trigger signal that switches the Output Signal according to the rule:
Data Types:
Input signal used as Output signal when Trigger Input is equal to zero.
Data Types:
Output
Returns one of the input signals according to the trigger.
Data Types:
About MWF
MWF is a traditional Brazilian company that provides a wide range of electronic and mechatronic products for industry sectors such as automotive, agricultural machinery and aerospace.
Contact Us
Rua Doutor Siqueira, 139 / Sala 804 Campos dos Goytacazes - RJ, Brasil
contact@mwf-technologies.com
© 2018-2026 MWF. All rights reserved.