Description:

This block can be described by the following rule:

• If the signal received is 0, the signal flowing into the port is 0V (FALSE). As a consequence, 0V can be measured at the physical port.
• If the signal received is different of 0, the signal flowing in the port is 5V (TRUE). As a consequence, 5V can be measured at the physical port.

Figures 1, 2, and 3 show a diagram using a Digital Output block. At time of 5s, the Compare To Constant block returns true as the comparison result. When the signal received by the Digital Output block becomes different from zero, it changes the logical state of the port.

Figure 1 - Example diagram

Figure 2 - Digital port represented in the Workspace

Figure 2 shows the Digital Output 0 port connected to a Scope block. After the simulation, it is possible to see the logical state changing.

Figure 3 - Digital signal as expected in the physical port (real-world signal)

Parameters:

Ports:

Input