Gain
Multiplies the input signal by a constant value
Category: Math
Description:
The output signal is the result of the product between the input signal and a constant value. The constant value is a parameter defined by the user. This calculation is described by the equation:
Where:
- : Output signal.
- : Input signal.
- : Gain.
Figure 1 shows some examples of gain blocks being applied.
Figure 1 - Gain using different values
Parameters:
In every step during simulation, the input signal is multiplied by the gain value.
Every time that this parameter is typed, the system validates and, if necessary, quantifies the value in Q15.16 data type.
Ports:
Input
The signal flowing through this port is multiplied by the Gain Value.
Data Types:
Output
The result of the multiplication is returned by this port.
Data Types:
About MWF
MWF is a traditional Brazilian company that provides a wide range of electronic and mechatronic products for industry sectors such as automotive, agricultural machinery and aerospace.
Contact Us
Rua Doutor Siqueira, 139 / Sala 804 Campos dos Goytacazes - RJ, Brasil
contact@mwf-technologies.com
© 2018-2026 MWF. All rights reserved.