Byte To U32
Packs four bytes into a single U32
Category: Conversion
Description:
Some input blocks, e.g. RS485 Input, returns data split into bytes. In these situations, the Byte To U32 block is recommended due to the ability to pack the data into a DWORD. Figure 1 shows an example.
Figure 1 - Example Diagram
As can be seen, the number 2221313257 returned by the RS485 Input was split into four bytes. Individually, each byte has a different meaning, but after the packing, their collective arrangement does not shuffle the original content as provided to its inputs.
Ports:
Input
The Byte To U32 block has four input ports. Each one of them receives a byte of the U32 data. The upper port is responsible for the least significant byte and the lower is responsible for the most significant byte.
Data Types:
Output
Returns the reconstructed signal after the packing.
Data Types:
About MWF
MWF is a traditional Brazilian company that provides a wide range of electronic and mechatronic products for industry sectors such as automotive, agricultural machinery and aerospace.
Contact Us
Rua Doutor Siqueira, 139 / Sala 804 Campos dos Goytacazes - RJ, Brasil
contact@mwf-technologies.com
© 2018-2026 MWF. All rights reserved.