PWM Output
Assign a PWM signal in a digital port
Category: Output
Description:
The PWM Output block sets the duty cycle used in the PWM signal returned by a physical port. The signal received by the block must be a number between 0 and 100, the received value is used as the duty cycle percentage.
Parameters:
QFIRE CTR-101
has four different modules for the PWM. This parameter defines what of them will receive the information in received by the block.This parameter defines if the duty cycle received is for a High or Low PWM. It is important to take care with this parameter and the PWM Configuration.
Ports:
Input
The signal received by this port is used to set the duty cycle. The signal must be between 0 and 100.
Data Types:
About MWF
MWF is a traditional Brazilian company that provides a wide range of electronic and mechatronic products for industry sectors such as automotive, agricultural machinery and aerospace.
Contact Us
Rua Doutor Siqueira, 139 / Sala 804 Campos dos Goytacazes - RJ, Brasil
contact@mwf-technologies.com
© 2018-2026 MWF. All rights reserved.