Add
Adds or subtracts the input signals
Category: Math
Description:
Sums the input signals in different ways. Figure 1 shows the four different behavior of the Add block.
Figure 1 - Add block in four different modes
The icon of the block shows what operation is going to be executed in the simulation.
If it is necessary, it is possible to use more Add blocks adding more signals. See example in Figure 2.
Figure 2 - Diagram example using two Add blocks
Parameters:
This parameter defines the signals of the input signals, i.e. whether the signal is positive or negative.
Ports:
Input
The signal flowing into this port may keep its signal or change it depending on the first parameter of Signals of Inputs field.
Data Types:
The signal flowing into this port may keep its signal or change it depending on the second parameter of Signals of Inputs field
Data Types:
Output
The signal flowing from this port is the response of the mathematical operation using the input signals. The signal can be described by:
Where:
- : First Signal of Inputs.
- : Second Signal of Inputs.
- : Input Signal 0.
- : Input Signal 1.
- : Output Signal.
Data Types:
About MWF
MWF is a traditional Brazilian company that provides a wide range of electronic and mechatronic products for industry sectors such as automotive, agricultural machinery and aerospace.
Contact Us
Rua Doutor Siqueira, 139 / Sala 804 Campos dos Goytacazes - RJ, Brasil
contact@mwf-technologies.com
© 2018-2026 MWF. All rights reserved.