Logical Operations
Logical operation between two input signals
Category: Logical
Description:
Applies logical operation between two input signals. The operation can be defined by the parameter "Operator". Each option implements a logic gate. Figure 1 shows some examples.
Figure 1 - Diagram using Logical Operation block with different Operator
Parameters:
The parameter Operator in the Logical Operations' Properties defines the logic gate to be executed by the block.
Logical Operation Properties
Ports:
Input
The signal flowing into this port is used in the logic operation of the block. Only zero is assumed as logic false, otherwise it is assumed as logic true.
Data Types:
The signal flowing into this port is used in the logic operation of the block. Only zero is assumed as logic false, otherwise it is assumed as logic true.
Data Types:
Output
The signal flowing from this port is the response of operation executed. It generates one for logic true and zero for logic false.
Data Types:
About MWF
MWF is a traditional Brazilian company that provides a wide range of electronic and mechatronic products for industry sectors such as automotive, agricultural machinery and aerospace.
Contact Us
Rua Doutor Siqueira, 139 / Sala 804 Campos dos Goytacazes - RJ, Brasil
contact@mwf-technologies.com
© 2018-2026 MWF. All rights reserved.