QFIRE PRG-111

is a programming and debugging tool for

QFIRE PRO

processing modulesand carrier boards.

QFIRE PRG-111

datasheet is available here

Enclosure drawing

Figure 1 shows the programer schematics from the mechanics point of view.

Pinout

Figure 2 shows the

QFIRE PRG-111

pinout of the connectors in the left and right of the enclosure. In the front there is a Status LED and a button.

Power supply

The power supply connector is a connector located at the left of the programmer.

Micro USB Port

The Micro USB-port located at the left. It is used to program applications during development.

Status LED

The Status LED indicates the current status of the controller by colors, where:

• Green

  : The programmer is running an application.

• Blue

  : The programmer is not running any application.

• Red

  : An error happened and the programmer.

RS-485

RS-485 communication uses the connector located on the right to supply and communicate with targets..