Relational Operator
Compares input signals amplitudes
Category: Logical
Description:
Performas arithmetic comparison between two signals according to an Operator parameter. Figure 1 shows a diagram with different operators.
Figure 1 - Relational Operator block used in different operations
As can be seen in Figure 1, the response of the block is logical one when the input signal complies with the logic operation. Otherwise, the response is zero.
Parameters:
Defines which arithmetic comparison operation is executed in the Relational Operator block.
Ports:
Input
The signal flowing into this port is equivalent to A in the operation depicted in the block icon.
Data Types:
The signal flowing into this port is equivalent to B in the operation depicted in the block icon.
Data Types:
Output
The signal flowing from this port is the logical response of the operation executed. It assumes one if the relation holds true, otherwise it assumes zero.
Data Types:
About MWF
MWF is a traditional Brazilian company that provides a wide range of electronic and mechatronic products for industry sectors such as automotive, agricultural machinery and aerospace.
Contact Us
Rua Doutor Siqueira, 139 / Sala 804 Campos dos Goytacazes - RJ, Brasil
contact@mwf-technologies.com
© 2018-2026 MWF. All rights reserved.