Scope
Plots signals received in its input ports
Category: Analysis
Description:
Figure 1 shows a Scope block receiving a signal generated by a Wave Form block. The curve generated is shown in Figure 2.
Figure 1 - Scope Block receiving signal
Figure 2 - Curve in a Scope
The Scope block accept multiple inputs. The number of inputs is defined by the user. This configuration can be done typing the numbers of inputs in the area showed by Figure 2.
Figure 3 - Scope block with three inputs
The input ports can be renamed by clicking in the port name. These port names are assigned to the legend of each curve, this is enabled by the button in the northeast region of the Figure 2. Figure 4 shows a diagram with renamed input ports. Figure 5 shows the curve of this simulation with the enabled legend. The legend is enabled clicking the button.
Figure 4 - Scope block receiving three signals
Figure 5 - Curve in Scope with diagram of Figure <referencer reference=
Parameters:
The value defined in the insert box changes the numbers of input ports in the Scope block. Each port can receive a different signal to be plotted.
Ports:
Input
The signal flowing into this port is displayed as a time-dependent curve in a cartesian plot. This port can be renamed and configured to accept multiple signals individually.
Data Types:
About MWF
MWF is a traditional Brazilian company that provides a wide range of electronic and mechatronic products for industry sectors such as automotive, agricultural machinery and aerospace.
Contact Us
Rua Doutor Siqueira, 139 / Sala 804 Campos dos Goytacazes - RJ, Brasil
contact@mwf-technologies.com
© 2018-2026 MWF. All rights reserved.