Signal Source
Generates a signal defined in a CSV file
Category: Source
Description:
Complex signals can be defined in a sample-based manner inside a CSV file and consequently imported into QFIRE Studio by means of Signal Source block.
Dialog
Figure 1 shows the Signal Source Properties. It includes not only the CSV file, but interpolation/extrapolation rules as well.
Parameters:
Type or select the path of the file to be read.
The Signal Source block interpolates the values between two points during the signal generation. It is not necessary to define the signal in multiples of simulation step.
When simulation time is longer than the signal from CSV file, the Signal Source block extrapolates values after the last value of the file.
Ports:
Input
Outputs the signal according to the time sequence in the CSV file and interpolation/extrapolation rules.
Data Types:
About MWF
MWF is a traditional Brazilian company that provides a wide range of electronic and mechatronic products for industry sectors such as automotive, agricultural machinery and aerospace.
Contact Us
Rua Doutor Siqueira, 139 / Sala 804 Campos dos Goytacazes - RJ, Brasil
contact@mwf-technologies.com
© 2018-2026 MWF. All rights reserved.