Description:

This block is used in the analysis of communication busses. It can receive data from WIFI, CAN or RS-485. In Figure 1, it is possible to see a terminal block receiving data from a Message Source block. The received data can be seen in the Terminal dialog as shown in Figure 2.

Figure 1 - Terminal block connected to some message source.

Figure 2 - Terminal dialog showing the list of received messages

In the terminal dialog it is possible to see:

• Timestamp - Simulation time corresponding to the event of receiving data from the bus.
• Bus type - Type of digital communication bus connected.
• Id - Identification present in the preamble of the data frame.
• Payload - Data present in the data frame excluding the Id.

Additionaly, there is an export button in the dialog. This button allows to export the data shown in the dialog table into a CSV file.

Ports:

Input